With Steam Link via the Linux host, the controller works within the big picture mode menus, but not under the games - UNLESS I manually map keyboard keys or mouse buttons to the gamepad buttons. I've been trying each test scenario with five different games that are supposed to have full controller support (Cuphead, Stardew Valley, Lara Croft Go, Kingdom, Wolfenstein II New Colossus) just for consistency, but I've tried other games at times as well. I've tried many other settings, devices, and combinations, to see if I could find anything that does work. My goal is to have the SN30 gamepad working with my Linux host via SteamLink on the Raspberry Pi (because I prefer Linux), connected via Bluetooth, using the xInput method. Skipping ahead a bit - everything works perfectly from my RPI and Chromebook if I instead boot the same PC into Windows 10 and host Steam games from there. But when I use the Steam Link app to connect to the same Linux host from either my Raspberry Pi (3b), my HP Chromebook x2 (ARM based), or my Samsung TV, the same controller will no longer work with these games (or any others that I've tried). Ironically, if I run it through USB-C wired, steam detects it fine.I've got an 8bitdo SN30 controller that works fine with many Steam games under xInput mode when connected via Bluetooth directly to my Linux host (Linux Mint 20.3). Do the logs for me say anything that I'm doing wrong? I start it up as switch mode and checked the respective box in steam's controller settings as well. I bought an 8bitdo controller and tried to hook it up with steam, to no avail.
Hi mikela, apologies for necroing a very old thread. If so, this article has information for how to check and disable this setting: The four LED's on the bottom of the controller should start lightning up in a back and forth pattern.Īs for your home button not working, Windows may be stealing the input from it and not allowing Steam to read it as Windows does this by default for the Xbox button (or its equivalent) on controllers. To start the controller in Switch mode, turn off the controller, then press and hold the Y button then press a hold the start button. Originally posted by mikela:I looked at your logs again and it looks like your controller is actually in its Xinput mode, not its Switch mode, which is why it shows up as an Xbox controller.
0 kommentar(er)
